Classic Modules

E – Communication with SIMATIC S7

In this module, the reader learns how an ISO connection is commissioned on the Ethernet between two S7-300s with the CPU-342-1 IT communication processor.

Document
Language
 
 
 
Training  curriculum (PDF) 
 
 
 

In this module, the reader is acquainted with the application options and use of web technologies in automation systems. The necessary steps for this are represented on the basis of a "CP343-1 IT" module. As an example, the visualization of a tank is used, in which the current process values can not only be displayed, but also modified. In addition, the specified tank applet is extended with further functions in order to obtain an insight into the development of user-defined applets.

Document
Language
 
 
 
Training  curriculum (PDF) 
 
 
 

In this module, the reader is acquainted with the options and techniques for connecting programmable logic controllers to the Internet. The necessary steps for this are represented using the example of a "CP343-1 IT" module and a Bintec ISDN router.

Document
Language
 
 
 
Training  curriculum (PDF) 
 
 
 

In this module, the reader learns how PROFINET is commissioned with the CPU 315F-2 PN/DP as IO controller and the ET 200S as IO device.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

In this module, the reader learns how PROFINET is commissioned with the CP343-1 Advanced as IO controller and the ET 200S as IO device.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

In this module, the reader learns how PROFIBUS DP components can be integrated with PROFINET. It shows how the CPU 315F-2 PN/DP is commissioned with the IE/PB link as network transition and an ET200S as DP slave.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

In this module, the reader learns how diagnostics can be performed objectively on the PROFINET. This uses a configuration with a CPU 315F-2 PN/DP as IO controller, the ET 200S as IO device and a diagnostics-capable SCALANCE X208 switch.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

The reader learns how a safety-related application is started up on the PROFINET (PROFIsafe).

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

In Module E09, the reader learns how two PLCs with the CPU 315F-2 PN/DP can communicate with each other via PROFINET. Module E09 shows the method for startup in principle, using a brief example.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

The reader learns networked how two stations can be generated as CBA components, in order to be networked with IMap into an overall project. The two stations CPU 315F-2 PN/DP are used as PLCs. They are interconnected by means of PROFINET. Module E10 shows the method in principle, using a brief example.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
S7 project (ZIP)
 
 

In this module, the reader learns how to commission networting and data exchange between PLCs and RFID-components.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
Instructions (ZIP)
 
 
Templates (ZIP)
 
 
S7 project (ZIP)
 
 

In this module, the reader learns how to commission networting and data exchange between PLCS and the Vision Sensor VS120.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
Instructions (ZIP)
 
 
Templates (ZIP)
 
 
S7 project (ZIP)
 
 

In this module, the reader learns how to commission networting and data exchange between PLCS and the Vision Sensor VS130-2.

Document
Language
 
 
 
Training  curriculum (DOC) 
 
 
Training  curriculum (PDF)
 
 
Instructions (ZIP)
 
 
Templates (ZIP)
 
 
Software (ZIP)
 
 
S7 project (ZIP)