SITOP PSU6200. High performance. Focused diagnostics.

The all-around power supply for a wide range of applications - now up to 960 watts.

With award-winning industrial design, space-saving width, optimized terminals, comprehensive diagnostic options, and high operational reliability: SITOP PSU6200 is the extremely high-performance power supply for 12, 24 and 48 V standard applications. The power supply units offer comprehensive functions and features for focused diagnostics, fast installation, and dependable operation. The new 3-phase power supplies 24 V/40 A and 48 V/20 A now also supply applications with up to 960 watts nominal power.

Select your SITOP PSU6200 in the TIA Selection Tool:

Configure & order

Portfolio

SITOP PSU6200, 1-phase, 12 V

The stabilized SITOP PSU6200 1-phase power supplies are available with an output voltage of 12 V in three performance classes. They come with a wide-range input voltage of 120 V to 230 V AC. The devices are also DC-capable, from 110/120 V to 240 V DC. The 12 V devices offer constant current up to a 9 V supply voltage.

Further information and ordering options in the Siemens Industry Mall

SITOP PSU6200, 1-phase, 24 V

The stabilized SITOP PSU6200 1-phase power supplies are available with an output voltage of 24 V in six performance classes. The wide-range input covers 120 V – 230 V AC and also offers DC capability from 110/120 V to 240 V DC. The 24 V units have constant current behavior and go into hiccup mode below 15 V output voltage.

Further information and ordering options in the Siemens Industry Mall

SITOP PSU6200, 1-phase, 48 V

The stabilized SITOP PSU6200 1-phase power supplies are available with an output voltage of 48 V in a single performance class. The wide-range input covers 120 V – 240 V AC as well as 110 V – 240 V DC. The 48 V power supply unit offers constant current up to a supply voltage von 30 V.

Further information and ordering options in the Siemens Industry Mall

SITOP PSU6200, Ex, 1-phase, 24 V

The stabilized SITOP PSU6200 Ex 24 V/5 A, 10 A and 20 A 1-phase power supplies have painted circuit boards (conformal coating) for use in hazardous areas in accordance with ATEX (Zone 2) and IECEx (Zone 2).

In all other respects they have the same characteristics of the corresponding power supplies SITOP PSU6200, 1-phase, 24 V.

Further information and ordering options in the Siemens Industry Mall

SITOP PSU6200, 3-phase, 24 V

The stabilized SITOP PSU6200 3-phase power supplies are available with an output voltage of 24 V in three performance classes. The wide-range input covers 400 V to 500 V AC, and DC connections between 450 V and 600 V DC are also possible. The 3-phase 24 V devices offer constant current up to a 15 V supply voltage.

Further information and ordering options in the Siemens Industry Mall

SITOP PSU6200, Ex, 3-phase, 24 V

The stabilized SITOP PSU6200 Ex 24 V/5 A, 10 A, 20 A and 40 A 3-phase power supplies have painted circuit boards (conformal coating) for use in hazardous areas in accordance with ATEX (Zone 2) and IECEx (Zone 2).

In all other respects they have the same characteristics of the corresponding power supplies SITOP PSU6200, 3-phase, 24 V.

Further information and ordering options in the Siemens Industry Mall

SITOP PSU6200, 3-phase, 48 V

The stabilized SITOP PSU6200 3-phase power supplies are available with an output voltage of 24 V in three performance classes. The wide-range input covers 400 V to 500 V AC, and DC connections between 450 V and 600 V DC are also possible. The 48 V units have constant current behavior and go into hiccup mode below 30 V output voltage.

Further information and ordering options in the Siemens Industry Mall

SITOP BUF1200 (300 ms/40 A), SITOP RED1200 (40 A) und SITOP SEL1200 (8 x 10 A)

For even higher availability, combine the 1-phase and 3-phase power supply units with the all-around SITOP add-on modules. These include the new buffer module SITOP BUF1200, the redundancy modules SITOP RED1200 and selectivity modules SITOP SEL1200, and SITOP SEL1400 in an attractive design to match the SITOP PSU6200.

Benefits at a glance

Optimized condition monitoring with SITOP PSU6200

Permanent condition monitoring

thanks to integration in the automation system via their diagnostics interface.

Check-up directly on the housing with SITOP PSU6200

Fast check-up directly on the housing

with the diagnostics monitor on the front of the LED display showing DC condition, capacity utilization, or operating hours of the power supply unit.

High safety level while the system is operating

thanks to 150 percent extra power for up to 5 seconds per minute, constant current for short-term overloads and Hiccup mode.

Fast, error-free wiring

using push-in terminals, unique terminal labeling, and a third negative terminal for grounding.

Find out more here.

SITOP PSU6200 brochure

Highlights Experience the start of a new chapter in the world of standard power supplies with the all-around SITOP PSU6200 power supply. Whether you’re a builder or operator of control panels, machines, or plant.

Focused diagnostics. Top integration.

As a technician, Alex needs to ensure everything runs smoothly. To do this he relies on SITOP PSU6200, because the diagnostics monitor for these power supply units uses an LED to signal its load and service life. Its diagnostics interface allows permanent condition monitoring of the power supply unit thanks to integration in the automation system.

Fast installation. Top efficiency.

Luke is an electrician for a control panel builder. He’s impressed by the way the clear labeling and the push-in terminals of the SITOP PSU6200 make wiring faster. Plus, the slim width with no need for extra clearance saves a lot of space.

Dependable operation. Top reliability.

For Tom, a department head, SITOP PSU6200 offers a true benefit in terms of keeping his machines running reliably. It features a high overload capacity, extremely robust wide range input, a strong metal housing – and it already complies with the EMC standard that will be mandatory in the future.

Links and information

Teamwork at its best – with the SITOP PSU6200 starter package II

Get a 20% discount on the unit price and experience the benefits of our 1-phase PSU6200 power supply (24 V DC/10 A) in combination with an 4-channel SEL1400 selectivity module.

Find out more

TIA Selection Tool – quick, easy, smart configuration

The TIA Selection Tool guides users quickly and easily to error-free device selection and configuration.

Find out more

The SITOP knowledge pool – 24 V know-how

Benefit from expert tips and tutorials on the SITOP power supply systems.

Find out more

Industry Mall – catalog and ordering system

Just register and order SITOP products directly from the Industry Mall.

Find out more

Downloads

SITOP PSU6200 brochure

Support

+49 (0) 911 895-7222

support.automation@siemens.com

Services

The fastest way to the experts

Proposed solutions for your queries and direct access to our experts in Technical Support

Support Request (SIOS)

Special investigation

Special investigations analyze the causes of problems that have been occurring more frequently with no explanation.

Special investigation

Logistical handling of returned goods from service processes

Central returns processing at the Service Logistics Center in Erlangen

Return delivery address: Siemens AG Retouren Center c/o Geis Industrie-Service GmbH, Tor 1-4, Kraftwerkstr. 25a, 91056 Erlangen, Germany

Contact

Any questions?

If you would like to know even more about the all-around SITOP PSU6200 power supply or if you have any questions, just talk to our experts. They will be glad to assist you.

Find out more:

SITOP PSU6200. High performance. Focused diagnostics.

The all-around power supply for a wide range of applications - now up to 960 watts.