Simple cycle power generation (ISO) up to 0 MW(e)
More than 58.5% net efficiency in combined cycle mode
A robust industrial gas turbine designed for flexibility
The combustor and burner designs offer world-class emission performance over a wide load range and are capable of single-digit NOₓ and CO emission levels. Low emissions are also achieved with liquid fuel without the need of water injection.
Designed to reduce environmental impact, the SGT-800 gas turbine will help you meet even the strictest emission regulations worldwide.
The SGT-800 features a compact, modular, maintenance-friendly design. This maintainability combined with the turbine’s robust single-shaft arrangement, long time between overhauls and long lifetime ensures its high operational availability.
Flexible service concepts for on-site or off-site maintenance with possibility for 48-hour core engine exchange will maximize the availability even further.
With its high electrical efficiency the SGT-800 is the core of your power plant installation – from simple cycle to combined cycle operation, with single or multiple units.
A hot climate option is available to further increase performance at high ambient temperatures.
Its excellent steam generation capability also makes the SGT-800 an ideal choice in combined heat and power (CHP) installations.
The SGT-800 industrial gas turbine combines a simple robust design for high reliability and easy maintenance with high efficiency and low emissions. The successive evolution of the SGT-800, based on experience of the installed fleet and on proven design solutions, ensures that you will get the optimal performance and lifetime out of your gas turbine.
Standard options for hot and cold climates are available for operation at extreme ambient temperatures. The hot climate option offers 26% more power and a 5.8% reduction in heat rate at 50 °C.
Two different package solutions are available for increased flexibility in order to meet your individual requirements. Both are available for 50 Hz and 60 Hz markets.
Flexibility and efficiency are key for your power plant solutions. The excellent efficiency and steam-raising capability of the SGT-800 gas turbine make it outstanding in cogeneration – also called combined heat and power (CHP) – and combined cycle installations.
We offer you a broad range of power plant configurations based on one or multiple SGT-800 gas turbines. Within our standard plant configuration we can offer a high degree of scope flexibility. This enables plant optimization to suit your specific requirements, such as island-mode operation or multiple power blocks.
Our comprehensive portfolio of services provides low life cycle cost and optimum performance throughout the turbine’s life cycle: Long Term Programs (LTP), overhaul service, field service, spare parts, service exchange, remote diagnostic service, and modernization and upgrades.
With up to 60,000 equivalent operating hours (EOHs) between major overhauls the SGT-800 provides high operational availability.
Whether time-based or cycle-based, we offer flexible standardized maintenance concepts. On-site maintenance or modular overhaul, without the need for special workshop maintenance, is available for both package solutions. For the single-lift package, off-site maintenance with 48-hour core engine exchange is optionally available.
With its compact and modular setup, the SGT-800 gas turbine is designed for easy maintenance. The vertically split compressor casing enables easy access – a single-blade or a single-vane segment can be exchanged on site. For quick and easy inspections, the burners can be removed without cover lift.
Whatever you need: The SGT-800 offers gas only, liquid only (Diesel No.2) or dual fuel (gas/liquid) with on-load fuel-changeover capability. The excellent fuel flexibility allows for high content of inert gases, hydrogen and heavy hydrocarbons without any maintenance impact.
The low gas supply pressure requirement (27–30 bar[a] / 390–435 psi[a]) reduces the need for a gas compressor on site.
All SGT-800 units are equipped with a robust dual-fuel Dry Low Emission (DLE) combustion system to minimize NOₓ and CO emissions. With this gas turbine, capable of single-digit NOₓ and CO emission levels and world-class emission performance over a wide load range, you will comply with both global and regional regulations.
*Natural gas, other gases within specification, liquid fuel (Diesel No.2) and dual fuel (gas and liquid)
**NOₓ emissions at 15% O₂ on fuel gas (with DLE)
All performance values are based on standard design, ISO ambient conditions and natural gas fuel. No intake or exhaust loss.
The combined cycle plant SCC-800 is available based on one or multiple SGT-800 gas turbines. Combined cycle performance is based on two pressure non-reheat (2PNRH) or three pressure non-reheat (3PNRH) bottoming cycle.
It looks like you are using a browser that is not fully supported. Please note that there might be constraints on site display and usability. For the best experience we suggest that you download the newest version of a supported browser: