SGT6-8000H heavy-duty gas turbine (60 Hz)
Well-proven H-class technology backed by largest commercially operating fleet experience in the market
Simple cycle power generation (ISO) 0 MW(e)
Combined cycle efficiency: 61%
Outstanding performance and efficiency
H-class gas turbines achieve one million operating hours
The Siemens H-class turbine has been on the market for nearly a decade and has now achieved a significant milestone by exceeding one-million fired hours of commercial operation. With 70 turbines in operation on four continents and almost 100 machines sold, the SGT-8000H is the market leader in its class and delivers a top performance that's been setting benchmarks throughout the industry.
Excellent performance and outstanding efficiencyThe SGT6-8000H was the very first air-cooled H-class gas turbine on the 60 Hz market and has since demonstrated its high operational flexibility and low lifecycle costs. More than 1 million fired hours of operational experience make it the most reliable and tested H-class gas turbine technology available today. With a power output of 310 MW in simple cycle, or 460 MW in combined cycle operation, and a combined cycle efficiency of 61%, it is among the most efficient and powerful gas turbines in commercial operation.
Highlights of the SGT6-8000H gas turbine
In combined cycle operation, the SGT6-8000H gas turbine provides a power output of 460 MW and an efficiency of 61%. Its internal cooling air passages from compressor to turbine section ensure fast thermal response of the rotor in case of high load transients and fast cold starts. A gas turbine designed for short start-up times and high operational flexibility.
The SGT6-8000H can be easily integrated in single-shaft (SCC6-8000H 1S) or multi-shaft (SCC6-8000H 1x1, 2x1, or 3x1) combined cycle plants.
Our proven and validated package and plant concepts use standardization, preassembly and prepackaging to minimize field assembly and the need for piping fabrication during construction. This results in easy turbine installation and a shorter project duration.
Moderate firing temperatures allow the use of proven materials to boost reliability and keep maintenance low.
Additionally, the SGT6-8000H has been optimized for short outages: Thanks to the Hirth-serrated rotor disk assembly and central tie rod, rotor maintenance and de-stacking can be done onsite. The turbine blades 1 and 4, and vane 1 can be removed without lifting the cover for quick and easy maintenance.
The gas turbine is capable of world-class fast cold starts and hot restarts due to the light and stiff rotor with internal cooling air passages, the advanced can annular combustion system and Hydraulic Clearance Optimization (HCO) active clearance control. You can achieve combined cycle base load within 30 min for hot starts.
Ingenious design to the core
The rotor is based on self-centering and -aligning discs with Hirth serration and central tie rod, providing you with the advantage of on-site rotor maintenance.
The advanced can annular combustion system creates a uniform temperature profile at the turbine entry, ensuring a high fuel flexibility and reliability of your gas turbine. Moderate firing temperatures allow the use of proven materials that improve reliability while reducing maintenance, leading to excellent availability.
Standardized design, flexible solutions
The SGT6-8000H package solution consists of the core turbine, an SGen6-100A generator (or optionally, an SGen6-2000H generator), and auxiliary systems.
We offer you a standardized basic design with options geared to your specific requirements, as well as flexible solutions for short installation times and economic power generation. By grouping subsystems and installing them in separate auxiliary packages, we strive to minimize field assembly.
The gas turbine generator packages have a compact footprint designed for limited space requirements.
The SGT6-8000H fires up
Combined cycle power plants based on the SGT6-8000H (plant name: SCC6-8000H) are profitable solutions for competitive energy markets with fluctuating power demand. Featuring a fast-start capability, it will achieve combined cycle base load within 30 min for hot start (start-up gradient: 30 MW/min). High load gradients allow for fast load changes. With excellent peaking capabilities, and a high part load efficiency with emission compliance down to lower part load, the SGT6-8000H plants strike an optimal balance between capital costs, performance, and operational considerations.
SGT6-8000H: Designed for short outages and easy maintenance
We offer Long Term Programs (LTP), overhaul services, field service, spare parts, reconditioning of components and modernization upgrades. Whether scheduled service or short-term support, our specialists are there for you, on-site all over the world.
The SGT6-8000H generator package is optimized for short outages. On-site rotor maintenance, including rotor de-stacking and balancing, eliminates the need for a spare rotor as well as transport costs for workshop maintenance. All compressor blades are replaceable without rotor de-stack or lift.
Fuel flexibility matters
The SGT6-8000H gas turbines are capable of firing a wide range of fuel gas, and fuel oil; as well as a wide range of non-standard fuels like LNG, syngas, low-calorific gases (low-BTU gases), naphta, condensate and others. The engines, equipped with DLE burners, can use up to 30 vol% of hydrogen (H2).
Designed to meet stringent environmental requirements
The SGT6-8000H gas turbine uses the can annular combustion system to successfully run in base and part-load operation while still complying with NOX and CO regulations.
NOX emissions: ≤ 25 ppmvd on fuel gas (without water injection, at 15%O2)
NOX emissions: ≤ 42 ppmvd on fuel oil (with water injection, at 15%O2)
News and eventsStay up-to-date
Please use another Browser
It looks like you are using a browser that is not fully supported. Please note that there might be constraints on site display and usability. For the best experience we suggest that you download the newest version of a supported browser: