Servo geared motors – offen für Getriebevielfalt

Servo geared motor SIMOTICS S-1FG1

The SIMOTICS S-1FG1 servo geared motors are compact geared motors. Compared to standard geared motors with induction machines, they have smaller dimensions, weigh less and have a higher dynamic response. The range of types covers helical, parallel shaft, bevel and helical worm geared motors in the usual frame sizes and speed/torque classes. The SIMOTICS S-1FG1 servo geared motors use the same operating heads as the SIMOGEAR geared motors. Flexible servo drive system for demanding applications. Siemens has expanded its drive portfolio for servo applications to include the SIMOTICS S-1FG1 servo geared motor that is optimally harmonized with the SINAMICS S120 inverter system.

Configure and order SIMOTICS S-1FG1 servo geared motors quickly and easily

Configure directly online (link missing)

SIMOTICS S-1FG1 Vorteile & Einsatzgebiete Egal ob Positionieren, Winkelgleichlauf, Taktantrieb oder Bahnsteuerung in Werkzeugmaschinen: Mit SIMOTICS-Servogetriebemotoren von Siemens profitieren Sie von hoher Dynamik, Präzision, Kompaktheit und Robustheit.

Benefits

Extremely compact design as a result of the direct mounting
Maintenance-free and lubricated for life (exception, worm gearing)
High efficiency
Low torsional backlash
Low running noise due to the helical teeth
Suitable for cyclic operation with alternating load and continuous duty
Low-cost solution when compared to planetary geared motors
compatible with SIMOGEAR operating heads
Degree of protection IP65

Einsatzgebiete

Verpackungsmaschinen
Druckmaschinen
Holz- und Metallverarbeitung
Palettierer und Regalbediengeräte mit Hub-, Fahr- und Gabelantrieb
Dosierpumpen und Stellantriebe

SIMOTICS S-1FG1 Produktauswahl Die Servogetriebemotoren sind optimal auf das Antriebssystem SINAMICS S120 und die Inbetriebnahmetools abgestimmt, was die nahtlose Integration in die Antriebsund Automatisierungswelt ermöglicht. Über die Systemschnittstelle DRIVE-CLiQ und das elektronische Typenschild gelingt die Inbetriebnahme besonders schnell – für die einfache und fehlerfreie Verbindung der Komponenten sorgen vorkonfektionierte MOTION-CONNECT Signal und Leistungsleitungen.

Servo-Kegelradgetriebemotor SIMOTICS S-1FG1

Bevel geared Motor:

Gear ratios: 3.5 to 244.3
Torque range: 15 to 8160 Nm
Efficiency, two-/three-stage: 96 / 94 %
Torque flow through an angle of 90°
Solid shaft or hollow shaft with different shaft mountings
Flange, foot, tapped hole circle, torque arm

Servo-Flachgetriebemotor SIMOTICS S-1FG1

Parallel shaft geared Motor:

Gear ratios: 3.6 to 413
Torque range: 17 to 5140 Nm
Efficiency, two-/three-stage: 96 / 94 %
Parallel torque flow
Solid shaft or hollow shaft with different shaft mountings
Flange, foot, tapped hole circle, torque arm

Servo-Stirnradgetriebemotor SIMOTICS S-1FG1

Helical geared Motor:

Gear ratios: 3.4 to 373
Torque range: 14 to 5200 Nm
Efficiency, two-/three-stage: 96 / 94 %
Axial torque flow
Shaft with featherkey
Foot- and flange-mounted version

Servo-Schneckengetriebemotor SIMOTICS S-1FG1

Worm geared Motor:

Gear ratios: 6.2 to 102.5
Torque range: 46 to 1480 Nm
Efficiency dependent on gear ratio 60 to 90 %
Torque flow through an angle of 90°
Solid shaft or hollow shaft with different shaft mountings
Flange, foot, tapped hole circle, torque arm

SIMOTICS S-1FG1 Planetengetriebemotoren Produktauswahl Für Motion Control-Anwendungen mit hohen bis sehr hohen Genauigkeits- und Dynamikanforderungen sind Servomotoren mit Planetengetriebe die richtige Wahl. Je nach Anforderung stehen drei verschiedene Ausführungen zur Verfügung:

Motors with planetary gearbox

Motors with planetary gearbox 1FT7 with SP+ gearbox

Torsional backlash: ≤ 4 / ≤ 6 arcmin (one- / two-stage)
Efficiency: > 94 / > 97 % (one- / two-stage)
Nominal ratio: 4 to 50
Mounting type: Coaxial with a coupling
Degree of protection: IP65
Mechanical options: Solid shaft with/without key

Motors with planetary gearbox 1FK7 with SP+ gearbox

Torsional backlash: ≤ 4 / ≤ 6 arcmin (one- / two-stage
Efficiency: > 94 / > 97 % (one- / two-stage)
Nominal ratio: 4 to 50
Mounting type: Coaxial with a coupling
Degree of protection: IP65
Mechanical options: Solid shaft with/without key

Motors with planetary gearbox 1FK7 with LP+ gearbox

Torsional backlash: ≤ 12 arcmin
Efficiency: > 97 %
Nominal ratio: 5 and 10
Mounting type: Coaxial with a coupling
Degree of protection: IP64
Mechanical options: Solid shaft with key

Motors with planetary gearbox 1FK7 DYA

Torsional backlash: ≤ 8 arcmin
Efficiency: > 97 %
Nominal ratio: 5 and 10
Mounting type: Coaxial, mounted directly
Degree of protection: IP64
Mechanical options: Particularly compact, solid shaft with key

SIMOTICS S-1FG1 Downloads and Support Find downloads, support and services for the topic SIMOTICS S-1FG1.

Downloads

Support

Drive Technology Configurator

Services

Technical Support

SIMOTICS S-1FG1 - references

MaHA Korz GmbH

Walzbachtal, Deutschland

Maschinen- und Anlagenbau

SINAMICS S120, SIMATIC S7-1500, SIMATIC ET200SP

eins
zwei
drei

Simply configure and order

Configure and order your SIMOTICS S-1FG1 servo geared motor

Using the Siemens Drive Configurator, you can simply and quickly configure your SIMOTICS S-1FG1 motor and then order it through the Industry Mall

Configure and order SIMOTICS S-1FG1 motors quickly and easily