Technology

Excellent performance and outstanding efficiency

The SGT5-8000H was the very first air-cooled H-class gas turbine on the market. More than 400,000 fired hours of operational experience make it the most reliable and tested H-class gas turbine technology available today. With a power output of 425 MW in simple cycle, or 630 MW in combined cycle operation, and a combined cycle efficiency of 61%, it is among the most efficient and powerful gas turbines in commercial operation, with low operating and lifecycle costs. 
All facts at a glance:

Download product brochure

Highlights of the SGT5-8000H gas turbine

In combined cycle operation, the SGT5-8000H gas turbine provides a power output of 630 MW and an efficiency of 61%. Its internal cooling air passages from compressor to turbine section ensure fast thermal response of the rotor in case of high load transients and fast cold starts. A gas turbine designed for short start-up times and high operational flexibility.

The SGT5-8000H can be easily integrated in single-shaft (SCC5-8000H 1S) or multi-shaft (SCC5-8000H 1x1 and 2x1) combined cycle plants.

Our proven and validated package and plant concepts use standardization, preassembly and prepackaging to minimize field assembly and the need for piping fabrication during construction. This results in easy turbine installation and a shorter project duration. 

The engine's blade design is based on proven materials and tried and tested know-how, while incorporating the latest aerodynamic technologies. Your benefit: high efficiency and reliability, as well as low outage risk.

Moderate firing temperatures allow the use of proven materials to boost reliability and keep maintenance low.

Additionally, the SGT5-8000H has been optimized for short outages: Thanks to the Hirth-serrated rotor disk assembly and central tie rod, rotor maintenance and destacking can be done on site. The turbine blades 1 and 4, and vane 1 can be removed without lifting the cover for quick and easy maintenance.

The gas turbine is capable of world-class fast cold starts and hot restarts due to the light and stiff rotor with internal cooling air passages, the advanced can annular combustion system and Hydraulic Clearance Optimization (HCO) active clearance control. You can achieve combined cycle base load within 30 min for hot starts.

Four stages of fast acting variable-pitch guide vanes (VGV) will grant you optimized performance over a wide range of operating conditions, improved part-load efficiency, low part-load emissions, and high load transients.

More than 25 Siemens H-class gas turbines are in commercial operation, with > 300,000 fired hours. Overall, around 80 H-class turbines are under contract. 

Ingenious design to the core

The rotor is based on self-centering and -aligning discs with Hirth serration and central tie rod, providing you with the advantage of on-site rotor maintenance. 

The advanced can annular combustion system creates a uniform temperature profile at the turbine entry, ensuring a high fuel flexibility and reliability of your gas turbine. Moderate firing temperatures allow the use of proven materials that improve reliability while reducing maintenance, leading to excellent availability.

Standardized design, flexible solutions

The SGT5-8000H package solution consists of the core turbine, an SGen5-2000H generator, and auxiliary systems. We offer you a standardized basic design with options geared to your specific requirements, as well as flexible solutions for short installation times and economic power generation. By grouping subsystems and installing them in separate auxiliary packages, we strive to minimize field assembly.

The gas turbine generator packages have a compact footprint catered to limited space requirements.

The SGT5-8000H fires up

Combined cycle power plants based on the Siemens H-class turbine feature a fast-start capability. You can achieve combined cycle base load within 30 min for hot start (start-up gradient: 30 MW/min).

The plants can operate from part-load simple cycle up to full-load combined cycle. With excellent peaking capability, and high part-load efficiency complying with emission regulations down to lower part-load, this is your profitable solution for competitive energy markets with fluctuating power demand. For low water consumption, we offer air-cooled configurations.

All SGT5-8000H plant solutions strike an optimal balance between capital costs, performance, and operational considerations.

Comprehensive services to support you

We offer Long Term Programs (LTP), overhaul services, field service, spare parts, reconditioning of components and modernization upgrades. Whether scheduled service or short-term support, our specialists are there for you, on-site all over the world. 

The SGT5-8000H generator package is optimized for short outages. On-site rotor maintenance, including rotor destacking and balancing, eliminates the need for a spare rotor as well as transport costs for workshop maintenance. All compressor blades are replaceable without rotor destack or lift. 

Fuel flexibility matters

Whatever your needs may be: The SGT5-8000H gas turbines are capable of firing a wide range of fuel gas and fuel oil, as well as a wide range of non-standard fuels like LNG, syn-gas, low-calorific gases (low-BTU gases), naphta, condensate and others.

Low emissions


This gas turbine ensures an emission compliance over a wide load range.


NOₓ emissions at 15% O₂ dry:

  • Emissions on fuel gas at 15% O₂, without water injection: NOₓ ≤ 25 ppmvd | CO  ≤ 10 ppmvd

Technical data

Performance data for simple cycle power generation

NOₓ emissions at 15% O₂ at ISO ambient conditions.

SCC5-8000H: Performance data for combined cycle power plant

Physical dimensions and weight

The SGT5-8000H is suitable for the following applications and industries

Excellent combined-cycle efficiency with the SGT5-8000H: The Lausward Fortuna power plant in Düsseldorf, Germany

Downloads and support

Find out more about our gas turbine offerings

In our download section, you can find brochures, technical papers, and more. Or you can contact us directly for specific inquiries.

For more information, please contact our Customer Support Center.

    

Siemens AG

Freyeslebenstrasse 1

91058 Erlangen

Germany

(Charges depending on provider)

(From the German fixed network € 0.14/min.

and from the German mobile phone networks

max. € 0.42/min.)

References

Proven in commercial operation: SGT5-8000H reference highlights

More than 25 Siemens H-class turbines in commercial operation, with >400,000 fired fleet hours.  Overall, around 80 units are under contract.

Contact

Contact

Do you have a question regarding our products, solutions and services? To contact us, simply fill out our inquiry form.

Contact form

Contact form