Contact Ukraine | Русский

Global sites

        Industrial Trent 60 aeroderivative gas turbine

        SGT-800 Industrial Gas Turbine

        up to

        0 MW

        • power generation

        Industrial Trent 60 info package
        Technology

        Most powerful, pure aeroderivative gas turbine in its class

        The Industrial Trent 60 has established a new benchmark for power output, fuel economy, and cost savings. The gas turbine is highly flexible, offering high power and efficiency with minimal drop-off at part-load and reduced speed conditions. It is available with Wet Low Emission (WLE) and Dry Low Emission (DLE) combustion systems. 

        Highlights of the Industrial Trent 60 gas turbine

        Due to its three independent shaft design, the gas turbine is highly flexible, offering high power and effiency with minimal drop-off at part-load and reduced speed conditions.

        For a simple cycle Industrial Trent 60 package, the start-up sequence time is designed to be less than 10 minutes from pressing the start button to reaching full baseload. This includes an allowance for simple cycle exhaust system purge. 

        The Industrial Trent 60 has the most mechanical drive experience in its class and is ideally suited to meet the higher power, variable speed demands required by applications such as natural gas liquefaction, gas transportation, and gas induction for oil recovery. 

        One of the most efficient gas turbines on the market, the Industrial Trent 60 provides up to 66 MW in simple cycle service at 42.5% efficiency. Its cold start capability and high cyclic life allow it to add power to the grid very rapidly to compensate for the fluctuations and variability of renewable and other power sources, making it ideal for peaking markets.

        The Industrial Trent 60 consists of eight engine modules for easy maintenance. Each module is pre-balanced to provide complete interchangeability.

        The Inlet Spray Inter-cooling (ISI) system provides performance improvements at ambient temperatures greater than 7° C (52° F), while minimizing the additional plant water consumption and auxiliary load compared to other inlet cooling technologies with comparable performance enhancement. 

        Ingenious design to the core

        The flexible design allows to use the same engine for power generation as well as mechanical drive service with no changes. The mechanical arrangement uses three co-axial independently rotating shafts contained within a carcass of axially joined circular cases. 

                  


        Industrial Trent 60 combustion system

               

        DLE (Dry Low Emissions) combustion system for clean combustion

                   

        WLE (Wet Low Emissions) combustion system is used to reduce emissions and boost performance with the injection of water

        Industrial Trent 60 packages

        The package is designed for quick installation and easy maintenance in the field.

        The package contains all components and subsystems that have been carefully selected and optimized to support the Industrial Trent 60 gas turbine:

        Gas turbine, enclosure, base frame, air intake, exhaust collector, engine control system, fuel metering skid, lubricating systems, starter system, vibration monitoring system, fire fighting system, package ventilation system, instrumentation, gearbox (if needed)

        Power generation package

        The AC generator is self-contained and has an air-cooled brushless exciter design using shaft-mounted axial blowers for circulating cooled air. It also encompasses line and neutral cubicles and has an off-skid mineral lube oil system. 

        Mechanical drive package

        Mechanical drive uses 60 Hz machine run to 3400 rpm which allows for 70% - 105% speed operation per API requirements. For Mechanical drive applications the Industrial Trent 60 is required to start a full train without the use of helper motors, whether the train is unloaded or fully pressurized. Siemens has shown through both experience in mechanical drive applications and testing, that the Industrial Trent 60 can manage these torque loads with margin. 

        By analysis of operating data, the Industrial Trent 60 is capable of reaching breakaway up to 30kN-m at 7700 rpm HP speed. The Industrial Trent 60, from power generation experience, can reach up to 7900 rpm HP speed during subsynchronous idle warm up for breakaway, thus 7700 rpm is within the standardized and proven capability of the gas turbine. Depending on the driven equipment, normal condition start require torque loads of 9-14kNm. The level of torque required to breakaway the LP system will vary according to the driven equipment, pressure and train dynamics. 

        SGT-800 based power plants

        For combined cycle and cogeneration (combined heat and power - CHP), Siemens offers a broad range of power plant configurations and scopes based on the SGT-800 gas turbine. For combined cycle, 1x1, 2x1, or 3x1 configurations are part of the standardized portfolio.

        Flexible scope

        We can offer the scope according to your needs:

        • Package
        • Power train
        • Thermal equipment
        • Power island
        • Power block
        • Complete power plant

        Stop and go - as often as you like

        tbd

        Engine change-out in under 24 hours

        Our service offerings include Long Term Programs (LTP), overhaul services, field service, spare parts, reconditioning of components and modernization and upgrades. 

        Maintenance of the Industrial Trent 60 engine can be accomplished quickly and easily due to the aero engine design. 

        Siemens specialists offer on-site support all over the world.

        Modular design allows for quick exchange of components

        The modular design of the Industrial Trent engine can allow for rapid exchange of components, while detailed work is carried out at a major overhaul facility. This can greatly reduce the turn time for engine maintenance at overhaul.

        Quick engine change-out

        The package can facilitate engine change out in under 24 hours of working time. 

        Fuel flexibility matters

        DLE - 34 to 48 WI / WLE - 34 to 52 WI

        Liquid Fuel Operation

        Due to the aeroderivative heritage, the Industrial Trent 60 can operate on liquid fuels without an EOH "equivalent operating hour" penalty. In fact, the Industrial Trent has exhibited complete liquid operation without performance or component life degredation. 

        Designed to meet stringent environmental requirements

        The Industrial Trent 60 DLE (Dry Low Emissions) engine is designed to meet stringent environmental requirements. 

        The use of eight radial staged combustors allows the successful operation of the engine in part load operation while still maintaining NOₓ and CO compliance. 

        NOₓ emissions:  ≤ 25 ppmvd on fuel gas (with WLE and DLE, at 15% O₂)

        Technical data

        Industrial Trent 60 DLE: Performance data for simple cycle power generation

        Industrial Trent 60 WLE ISI: Performance data for simple cycle power generation

        *Other fuels on request; automatic changeover from primary to secondary fuel at any load

        **NOx emissions at 15% O₂ on fuel gas (with DLE)

        Performance data for combined cycle power generation / 50 Hz

        Performance data for combined cycle power generation / 60 Hz

         Industrial Trent 60 WLE - water injected. ISI - Inlet Spray Intercooling. All combined cycle performance is based on 2 pressure, no reheat.

        Performance data for mechanical drive

        *Other fuels on request; automatic changeover from primary to secondary fuel at any load

        **NOx emissions at 15% O₂ on fuel gas (with DLE)

        Note: Industrial Trent 60 WLE - water injected

        Physical dimensions and weight

        For power generation, AC generator is included, dimensions include inlet filter housing, exclude exhaust stack.

        For mechanical drive, driven equipment is excluded, dimensions exclude inlet filter housing and exhaust stack.

        Applications

        More than 100 units installed worldwide

        The Industrial Trent 60 gas turbine is in operation for decades with hundreds of installations worldwide.

        Downloads and support

        Find out more about our products and services

        Find brochures, technical papers and more in our download section, or contact us directly for specific inquiries

        Brochures

        Articles and papers

        Posters

        For more information, please contact our Customer Support Center.

        • +49 180 524 24 71

        References

        Industrial Trent 60 reference highlights

        Ras Laffan, Qatar

        • Customer: Dolphin Energy Limited

        • Scope: 9 x Industrial Trent 60 gas ­turbines, and 9 x  Dresser-Rand DATUM centrifugal compressors

        • Production, processing and transportation of natural gas from world‘s largest known natural gas field North Field in Qatar

        Gas-fired power plant

        Bayonne, New Jersey

        • Customer: Macquarie Infrastructure Corporation

        • Scope: 8 x  Industrial Trent 60 WLE ISI units

        • Full power can be delivered in less than 10 minutes from start, enabling on/off cycle flexibility, reducing fuel costs and emissions

        Contact

        Contact

        Do you have a question regarding our products, solutions and services? To contact us, simply fill out our inquiry form.

        Contact form

        Contact form

        Related topics

        Industrial gas turbines for immediate sale

        We offer you aeroderivative and industrial gas turbines from our stock that are available immediately for shipment. Only while stock lasts.

        Gas Turbine Services

        Our service offerings for gas turbines include: Long Term Programs, Overhaul Services, Field Service, Parts, Lease Units, Service Exchange, Reconditioning of components, Modernization and Upgrades