SIMATIC-design power supplies
The optimal supply for SIMATIC S7 and more
Regarding design and functionality, the original power supplies of the SIMATIC integrate optimally into the PLC network. The startup and power reserves of the SITOP power supply units meet the requirements of the respective controllers. In addition, the mounting options of both components are the same. All of this ensures that controller and power supply or peripherals are perfectly matched. In addition to the SIMATIC systems, the SITOP power supply units in SIMATIC design also supply further consumers reliably with 24 V.
Everything fits together: power supply units, controllers, and IO systemsSITOP power supplies in SIMATIC design reliably supply numerous SIMATIC systems with 24 volts – from the controllers SIMATIC S7-300, S7-1200 and S7-1500 to the IO systems SIMATIC ET 200M, ET 200MP, ET 200pro, and ET 200SP.
Optimally coordinated ...
... in terms of design, function, and assembly
Power supplies in SIMATIC design merge perfectly into the PLC network. As well as the controller and IO systems, they also supply other loads reliably with 24 V DC. The issued certifications and the permitted temperature range allow the power supply, controller, and peripheral components to be used together in almost all areas. The system test that was performed for each of the SITOP power supply units in SIMATIC design together with the respective SIMATIC controller is particularly noteworthy.
SITOP in SIMATIC design:
- 1-phase, DC 24 V, for S7-300 and ET200M
- 1-phase, DC 24 V, for S7-1200
- 1-phase, DC 24 V, for S7-1500 and ET200MP
- 1-phase, DC 24 V, for SIMATIC ET 200SP
- 3-phase, DC 24 V, for SIMATIC ET200pro, IP67