Creative solution for tight spaces and longer distances

sinamics g110d distributed standard performance drive

SINAMICS G110D V/hz distributed drive

SINAMICS G110D is a simpler version of the higher-performance SINAMICS G120D, offering many of the same features. This v’hz distributed drive solution combines improved functionality, increased energy efficiency, a smaller footprint, lower total cost-of-ownership, and enhanced usability in a single drive. Perfect for use as a conveyor drive, it is ideal for installation in close proximity to motors located throughout facilities where dust and water ingression are a concern. The SINAMICS G110D is suitable for open-loop induction motors in a wide range of industrial applications and systems in which a drive is operated in a distributed configuration. Connected to AS-i or locally without a bus system, the drive may also be connected to PROFIBUS via the DP/AS-i Link.

Learn more

Download the SINAMICS G110D brochure

What you need to know about SINAMICS G110D

Jump to

Typical applications
Overview of strengths
Technical introduction
Downloads & support
Easy configuration & ordering

Typical applications

Moving

Conveyor applications are where the SINAMICS G110D drive is most often found, such as:

Material handling or packaging conveyors
Airport baggage carousels

pumping & ventilating for sinamics g110d standard performance distributed drive

Pumping / ventilating / compressing

However, there are other applications where the G110D can save space and wiring, such as in facilities with a number of different ventilation or pumping locations.

Processing

Communication, bus parameterization and diagnostics via AS-Interface permit reliable maintenance and plant-wide engineering. The digital and analog inputs provided on the device allow sensors and actuators to be simply connected directly to the drive. Thanks to the wide range of power ratings up to 10 HP (7.5 kW), almost all basic conveyor-related plants and systems can be designed without requiring a cabinet. Using its AS-Interface connection, SINAMICS G110D can be integrated as a module into the Totally Integrated Automation environment.

Back to jump menu

Overview of strengths SINAMICS G110D – The perfect distributed solution for basic applications

Faster engineering / faster commissioning

Integrated plug-and-play power and control
The same drilling template for all power ratings
AS-Interface bus configuration – easy to integrate with other hardware in an overall control schematic
In the Totally Integrated Automation (TIA) environment, operation is integrated and unified from SINAMICS to the automation level

Efficient & effective operation & maintenance

Direct communication - With a programmable logic controller (PLC) or control via I/O inputs
Optional Intelligent Operator Panel (IOP) - Simple text application setup in a reduced footprint. The IOP further provides the machine operator with a greater level of control, as well as alarm status alerts and resolution advice, so troubleshooting time is greatly reduced.
Optimum MMC/SD Card as parameter storage medium
The provided digital and analog inputs allow simple connection of sensors and actuators directly to the drive
Manual/automatic swtich
Integrated brake control and quick stop functions - Higher degree of reliability in heavy-load operations
Optional power disconnect switch for quick maintenance

Reduced total installed cost

Low profile for easier mounting near the motor, with no drive cabinet required, for further space savings
Rugged metal enclosure - degree of protection to IP65

Back to jump menu

Technology

Basic ratings

Format	Distributed, mounted separately from motor
Supply voltage / power range	3AC 380 – 480V ± 10% : 1 to 10 Hp (0.75 to 7.5 kW) - may be operated with a 15 HP (11 kW) motor under certain conditions
Control methods	V/Hz, FCC
Communication	AS-Interface
Features & functions	• Flying restart • Automatic restart • Technology controller • Quick stop	• Jog mode • Control for motor holding and operating brake • Electrical brakes
Motor compatability	Induction, torque
Degree of protection	IP65
Commissioning / configuration tools	STARTER, SIZER, DT Configurator
Integrated safety technology	Safe Torque Off
Standards compliance	UL 508C (UL list number E121068), CE, C-Tick

Application examples

SINAMICS G110D application examples

On the Semens Industry Online Support site

Additional system components

Click below for an overview of further supplementary system components for SINAMICS G110D, such as

Downloads and support

Downloads

SINAMICS G110D brochure
Catalog D31.1 - SINAMICS Drives for Single-Axis - Built-in
SINAMICS low voltage AC drives family brochure
SINAMICS low voltage drives resources page

SINAMICS low voltage drives resources page

Support

Siemens US distributor & sales locator

SINAMICS drives resources page

Siemens Industry Mall - SINAMICS G110D

SITRAIN industrial training

Services

Siemens Try Before You Buy program allows you to test drive SINAMICS G110D drives - to install one or more in your applications before you commit to purchasing.

This program is designed to give you the opportunity to prove to yourself (and your management!) that a SINAMICS variable speed drive will not only get the thumbs-up for performance, energy savings, etc,. but also for decreasing installation and commissioning time.

Pick up the keys at your local Siemens distributor