SITRAIN Courses

SITRAIN Vietnam offers 19 courses that suit your need of knowledge. 

SITRAIN Courses

Requirement: Basic knowledge of automation technology.

 

Description/Objective

 

The Totally Integrated Automation Portal (TIA Portal)  for  SIMATIC  S7-1200 forms the work environment for integrated engineering with SIMATIC STEP  7  Basic  and SIMATIC WinCC Basic. In this first part of  the SIMATIC TIA Portal S7-1200 training, we teach you the handling of  the TIA Portal, basic  knowledge  about the structure of the SIMATIC S7-1200 automation system, configuration and parameterization of hardware, and the basics of programming. You will learn how to clear simple hardware faults  and  software  errors  in the SIMATIC S7-1200 automation system and to create, modify and expand small STEP 7 programs. You will thus be capable of reducing downtime. 

 

Content

  • Overview and significant performance characteristics of the SIMATIC S7-1200 system family.
  • The components of the TIA Portal: SIMATIC STEP 7 Basic and WinCC Basic.
  • Program execution in automation systems.
  • Binary and digital operations in the function block diagram (FBD).
  • Setup and assembly of the SIMATIC S7-1200 automation system.
  • Addressing and wiring the signal modules.
  • Hardware and software commissioning of the SIMATIC S7-1200 with the TIA Portal.
  • SIMATIC S7-1200 hardware configuration and parameterization.
  • Introduction to the Touchpanel.
  • Saving and documentation of the implemented program changes with the TIA Portal.
  • Deeper understanding of contents through practical exercises on SIMATIC S7-1200 system model.

 

Requirements

  • Basic knowledge of automation technology.
  • You can use the available online entry test to ensure that the selected 
  • course matches your area of expertise.
  • This blended learning course combines web-based training (WBT) 
  • on the Internet with a 3-day attendance course: To prepare for the 
  • attendance course, you will receive the WBT "PLC Knowledge for Beginners". 
  • This allows you to improve your personal learning achievement in the 
  • attendance course.

Description/Objective

 

  • The   Totally  Integrated   Automation   Portal   (TIA Portal)   forms   the   work   environment  for   integrated engineering with SIMATIC STEP 7 Basic and SIMATIC WinCC Basic.
  • The second part of the SIMATIC S7-1200 training is based on the knowledge of the TIA Portal gained  in  the SIMATIC S7-1200 basic course, including SIMATIC STEP 7 Basic and HMI. You will expand your knowledge of programming in SCL, connecting drives, use of the TIA Portal diagnostic  tools  for  clearing  hardware  faults and software  errors,  and  PROFINET  IO.  You  will  also  learn  about  the  technology  function s of  the  PID controller and drive functions that are offered by the SIMATIC S7-1200. You will thus be able  to  adapt  your plant to new demands.
  • You can deepen your theoretical  knowledge  with  numerous  practical  exercises  on  a  TIA  system  model. This consists of a SIMATIC S7-1200 automation system, ET 200 distributed I/O, Touchpanel, drive, and a belt model.

 

Content

 

  • Set up SIMATIC S7-1200 PROFINET IO networks.
  • Understand the interaction of TIA components.
  • Perform specific commissioning of TIA components.
  • Use the PID controller technology functions and drive functions of the SIMATIC S7-1200. Systematically diagnose and correct hardware and software errors in the SIMATIC S7-1200 automation system with the diagnostic tools of the TIA Portal engineering portal.
  • Create simple programs in the programming languages LAD, FBD, and SCL.

 

Requirements

  • Finish S7 – 1200 basic course.

Description/Objective

The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC.

In this first part of the SIMATIC TIA Portal programming training, we teach you the handling of the TIA Portal, basic knowledge about the structure of the SIMATIC S7 automation system, configuration and parameterization of hardware, and the basics of standard PLC programming. You also receive an overview of HMI, PROFINET IO, and connecting drives.

After attending the course, you can do the following:

  • Understand the fundamentals of interaction of the TIA components
  • Solve simple programming tasks using elementary STEP 7 instructions
  • Reliably operate the "TIA Portal" engineering platform
  • Program simple plant functions with basic STEP 7 instructions in the ladder diagram (LAD) or function block diagram (FBD)
  • Perform simple commissioning of TIA components

Requirements

 

  • Basic knowledge of automation technology.
  • You can use the available online entry test to ensure that the selected course matches your area of expertise.
  • This blended learning course combines web-based training (WBT) on the Internet with a 5-day attendance course: To prepare for the attendance course, you will receive the WBTs "PLC Knowledge for Beginners" and "SIMATIC TIA Portal Structured Programming".
  • This allows you to improve your personal learning achievement in the attendance course.

 

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel

Content

  • Overview and significant performance characteristics of the SIMATIC S7 system family
  • The components of the TIA Portal: STEP 7, WinCC, Startdrive
  • Program execution in automation systems
  • STEP 7 block types and program structuring
  • Binary and digital operations in the function block and ladder diagram (FBD/LAD)
  • Programming of parameterizable blocks
  • Data management with data blocks
  • Programming organization blocks
  • Test tools for system information, troubleshooting, and diagnostics
  • Hardware configuration and parameterization of the SIMATIC S7 modules, a PROFINET IO system (ET-200), a Touch Panel.
  • Program Cycle, Process Image and Procee Image Partiion
  • Explanationn and using different organization blocks
  • Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 system model

Additional Comments

In this course you will work with SIMATIC S7-1500 and software SIMATIC STEP 7 based on TIA portal – for SIMATIC S7-1200 we offer the trainings TIA-MICRO1/2

 

 

Description/Objective

The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC. The second part of the SIMATIC TIA Portal programming training is based on the knowledge of the TIA Portal gained in the SIMATIC S7 TIA Portal programming 1 course (TIA-PRO1), including STEP 7, HMI, connection of drives, and PROFINET IO.

You will expand your knowledge of complex operations in statement lists (STL) and in Structured Control Language (SCL). Along with analog value processing and data administration with complex data types, the evaluation and handling of program-related errors are also considered. Building on this, you will learn how to display messages on the operator control and monitoring system (HMI).

Thanks to the knowledge imparted, you will gain new impetus and ideas for efficient PLC programming. You can deepen your theoretical knowledge with numerous practical exercises on a TIA system model. This consists of a SIMATIC S7-1500 automation system, ET200SP distributed I/O, TP 700 Touchpanel, G120 drive, and a conveyor belt model.

Requirements

  • Completely TIA-PRO1: SIMATIC S7 TIA Portal programming 1 course. 

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel

Content

  • Tools for program creation (e.g. structograms)
  • Analogue value processing
  • Functions, function blocks, and multi-instances using the IEC-compliant timer/counter as an example (International Electrotechnical Commission)
  • Jump commands
  • Indirect addressing
  • Classical software error handling and evaluation with error organisation blocks (OBs)
  • Evaluation of diagnostic data
  • Troubleshooting and alarms with a HMI device (Touchpanel)
  • Introduction into Structured Control Language (SCL) and S7-GRAPH
  • Deeper understanding of contents through practical exercises on TIA system model

Additional Comments

In this course you will work with SIMATIC S7-1500 and software SIMATIC STEP 7 based on TIA portal – for SIMATIC S7-1200 we offer the trainings TIA-MICRO1/2

 

 

Description/Objective

The Totally Integrated Automation Portal (TIA Portal) constitutes the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC. The course provides you with the knowledge to quickly and easily configure machine and plant-specific HMI tasks using the SIMATIC WinCC software based on the TIA Portal. You will learn to design and dynamize graphic images. You will learn how to archive messages and values and to design and implement the corresponding archives. You can effectively use the engineering phase thanks to what you have learned about reliably operating the system.

After attending the course, you can do the following:

  • Efficiently and reliably operate SIMATIC WinCC based on the "TIA Portal" engineering platform
  • Understand and edit SIMATIC WinCC projects for machine-level applications
  • Optimally create graphic images
  • Implement archiving concepts for alarms and values
  • Access specific values from the SIMATIC S7 and display and further process them in the operator control and monitoring system (HMI)

Requirements

  • Basic knowledge of automation technology.
  • You can use the available online entry test to ensure that the selected course matches your area of expertise.
  • This allows you to improve your personal learning achievement in the attendance course.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • System overview TIA Portal, SIMATIC WinCC (machine-level)
  • Creating a SIMATIC WinCC project
  • Configuration of connection to the SIMATIC S7 automation system
  • Basics of graphic image creation for operator control and monitoring
  • User administration
  • Alarm display, alarm logging, alarm configuration
  • Tag logging, trend configuration, trend display
  • Recipes
  • Use of various HMI stations
  • Deeper understanding of contents through practical exercises on SIMATIC S7-1500 system model

Additional Comments

In this course you will work with the SIMATIC WinCC Comfort and WinCC Advanced (both products are based on TIA Portal), and a SIMATIC S7-1500 as a communication partner. In that course you will work with Comfort Panel and a PC as single station, communicating to a SIMATIC S7-1500.

 

 

Description/Objective

The Totally Integrated Automation Portal (TIA Portal) provides the working environment for end-to-end engineering with SIMATIC STEP 7 and SIMATIC WinCC.

The SCADA functionality (Supervisory Control and Data Acquisition) of WinCC is designed for visualization and operation of processes, manufacturing cycles, machines and plants. The course is based on the possibilities of WinCC SCADA in TIA Portal at the time. You will learn how to create and dynamize the required interface. You will also be shown how to log messages and values and how to design and implement the appropriate logs. After learning how to use the system safely, you can use the engineering phase effectively.

After attending the course, you can do the following:

  • Use SIMATIC WinCC efficiently and reliably on the basis of the "TIA Portal" engineering platform
  • Understand and edit SIMATIC WinCC projects for use in the SCADA area
  • Optimally structure the user interface
  • Implement logging concepts for messages, alarms and measured values
  • Selectively access values in the SIMATIC S7 and display and further process these values in the HMI system

Requirements

  • Basic knowledge of automation technology.
  • You can use the available online entry test to ensure that the selected course matches your area of expertise.
  • This allows you to improve your personal learning achievement in the attendance course.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • System overview TIA Portal, SIMATIC WinCC (SCADA)
  • Creating a SIMATIC WinCC project
  • Configuring the connection to the SIMATIC S7 automation system
  • Structuring the operator interface
  • Fundamentals of creating graphics displays for human machine interfacing
  • Navigating through the plant displays
  • User administration
  • Message representation, message logging, message configuring
  • Variable logging, trend configuring, and trend plotting
  • Trend plotting, and message representation including logging of data in the database
  • Recipes
  • Faceplates for reuse and centralized modification of graphics blocks
  • Background processing Global Scripting
  • Reinforcement of the content by means of practical exercises on the SIMATIC S7-1500 system model

Additional Comments

In this course you will work with the SIMATIC WinCC Professional (SCADA system software based on TIA Portal) and a SIMATIC S7-1500 as a communication partner.

 

 

Description/Objective

The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC.

In this first part of the SIMATIC TIA Portal service training, we teach you the handling of the TIA Portal, basic knowledge about the structure of the SIMATIC S7 automation system, configuration and parameterization of hardware, and the basics of programming. You also receive an overview of HMI, PROFINET IO, and connecting drives. You will learn to diagnose and clear simple hardware faults and software errors. You will thus be capable of reducing downtimes in your plant.

After attending the course, you can do the following:

  • Understand the fundamentals of interaction of the TIA components
  • Reliably operate the "TIA Portal" engineering platform
  • Understand, change, and expand small STEP 7 programs
  • Configure, parameterize, and exchange SIMATIC S7 modules
  • Diagnose and fix simple hardware faults using the wiring test
  • Diagnose and fix simple program errors using the status block
  • Perform simple commissioning of TIA components

Requirements

  • Basic knowledge of automation technology
  • You can use the available online entry test to ensure that the selected course matches your area of expertise.
  • This blended learning course combines web-based training (WBT) on the Internet with a 5-day attendance course: To prepare for the attendance course, you will receive the WBT "PLC Knowledge for Beginners".
  • This allows you to improve your personal learning achievement in the attendance course.

Target group

  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Overview and significant performance characteristics of the SIMATIC S7 system family
  • The components of the TIA Portal: STEP 7, WinCC, communication
  • Program execution in automation systems
  • Binary and digital operations in the function block diagram (FBD)
  • Setup and assembly of the automation system
  • Addressing and wiring the signal modules
  • Hardware and software commissioning of the SIMATIC S7 automation system with the TIA Portal
  • SIMATIC S7 hardware configuration and parameterization
  • Presentation of a Touchpanel
  • Presentation of the drive
  • Setup and parameterization of PROFINET IO
  • Saving and documentation of the implemented program changes with the TIA Portal
  • Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 system model

Additional Comments

In this course you will work with SIMATIC S7-1500 and software SIMATIC STEP 7 based on TIA portal – for SIMATIC S7-1200 we offer the trainings TIA-MICRO1/2.

 

 

Description/Objective

This course is aimed at users with engineering tasks who want a compact introduction to programming SIMATIC S7. You will get an overview of human machine interfacing, PROFIBUS DP and the integration of drives.

What you learn about Totally Integrated Automation (TIA) will teach you to take a holistic view of your plant and to understand the relationships between the individual components. On completion of the course, you will thus be able not only to structure, create and modify simple SIMATIC S7 programs, but also to make optimal use of the engineering phase through more efficient working with STEP 7.

Requirements

  • Basic knowledge of automation
  • You can use the online tests to find out whether you have sufficient prior knowledge to participate effectively in the course you wish to attend.
  • This blended-learning course combines Web-based training (WBT) on the Internet with a 5-day attendance course: To prepare you for the attendance component, you will receive the WBT "PLC Knowledge for First-Time Users".
  • For an optimized post processing of the attendance course you get the WBT "RPOFIBUS". By using these learning media, you increase your personal learning success in the attendance course.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel

Content

  • System overview of the SIMATIC world and essential performance features of the SIMATIC system family
  • Components of the STEP7 Basic Package and its use
  • STEP7 basic operations
  • STEP7 block types and program structuring
  • Programming of parameterizable blocks
  • Data management with data blocks
  • Programming of organization blocks
  • Test tools for system information, troubleshooting and diagnostics
  • Hardware configuration and parameterization of the S7-300 modules, a PROFIBUS DP slave (ET-200S), a Touch Panel
  • Program documentation and backup
  • Deeper understanding of contents through practical exercises on the SIMATIC S7-300 system model

Additional Comments

In this course you will work with the SIMATIC STEP 7 V5.x software.

 

 

Description/Objective

This first component of the SIMATIC service course teaches the basic knowledge of the design of automation systems, the configuration and parameterization of the hardware, handling with the STEP 7 Basis Software and the fundamentals of programming. You also get an overview of human machine interfacing, PROFIBUS DP and the integration of drives.

What you learn about the integrated factory automation will teach you to take a holistic view of your plant and to understand the relationships between components. On completion of the course, you will thus be able to diagnose simple hardware faults or replace modules, to coordinate components optimally, carry our safe fault diagnostics and thus reduce downtimes.

Requirements

  • Basic knowledge of automation.
  • You can use the online tests to find out whether you have sufficient prior knowledge to participate effectively in the course you wish to attend.
  • This blended-learning course combines Web-based training (WBT) on the Internet with a 5-day attendance course: To prepare you for the attendance component, you will receive the WBT "PLC Knowledge for First-Time Users". For an optimized post processing of the attendance course you get the WBT "Micromaster 420". By using these learning media, you increase your personal learning success in the attendance course.

Target group

  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • System overview and essential performance features of the SIMATIC S7 system family
  • The components of the STEP 7 Basic Package
  • Program execution in the automation system
  • Binary and digital operations
  • Configuring and assembling an automation system
  • Addressing and wiring of the signal modules
  • Hardware and software startup of the automation system
  • Hardware configuration and parameterization in the case of S7-300
  • Reinforcement of the content through exercises on the device
  • Introducing the  TP Touch Panel
  • Introducing the SINAMIC drive
  • Configuration and parameterization of PROFIBUS DP
  • Backing up and documenting executed program changes
  • Deeper understanding of contents through practical exercises on the SIMATIC S7-300 system model

Additional Comments

In this course you will work with the SIMATIC STEP 7 V5.x software.

 

 

Description/Objective

On completion of this course the participant will have foundation knowledge of WinCC Flexible software package.

 

Requirements

Basic knowledge of automation technology.

 

Target group

  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • System overview of SIMATIC WinCC flexible
  • Creating the project
  • Configuring connections to SIMATIC S7
  • Fundamentals of graphics display creation for human machine interfacing
  • User administration
  • Message representation, message archiving, message configuring
  • Variable archiving, configuring curves, representing curves
  • Recipes
  • Handling different human machine interface stations

Additional Comments

In this course you will work with the SIMATIC STEP 7 V5.x software.

 

Description/Objective

 

  • The course is designed for personnel whose main area of activity is the care, servicing and maintenance of existing installations with SIMATIC PCS 7 control systems.
  • The focus is on typical servicing skills such as replacing wear parts and obtaining diagnostics data.
  • The course provides you with basic knowledge of the SIMATIC PCS 7 process control system and an introduction to the processes of SIMATIC PCS 7 Asset Management
  • Through practical exercises on training equipment on which you will perform the work you would also carry out during live operation, you will be able to put your newly acquired theoretical knowledge to practice. This will enhance your learning success.
  • When you have completed this course, you will be in a position to quickly obtain comprehensive diagnostics data of a running SIMATIC PCS 7 system and will be able to carry out simple maintenance work without stopping the installation.
  • In this way, you will enable downtime to be reduced and this will increase the efficiency of your automation system.

Requirements

Basic knowledge of process control technology, open-loop and closed-loop control technology and of handling Windows applications.

 

Target group

  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Initial activities when servicing a running system.
  • SIMATIC PCS 7 documentation and online support.
  • Basics of SIMATIC PCS 7.
  • Basics of fieldbus systems used.
  • Procurement of diagnostics data with the SIMATIC diagnostics tool.
  • Introduction to integrated asset management with SIMATIC PCS 7.
  • Reading out diagnostics data on the SIMATIC PCS 7 hardware.
  • Exchanging modules and components during running operation.
  • Handling data and project backups and creating and importing backup, images

Additional Comments

In this course you will work with the SIMATIC STEP 7 V5.x software, PCS7.

Description/Objective

  • In this course you will learn how to implement the diversity of engineering possibilities in a structured and efficient way with SIMATIC PCS 7 process control system.
  •  By doing exercises on original SIMATIC PCS 7 training units, you will implement software for the process automation of a plant right up to the HMI level. Features of SIMATIC PCS 7 such as integration of all subsystems, plant-oriented engineering, data management and project management are supplemented by advanced functions that enable efficient and cost-effective engineering. Utilize the benefits of Totally Integrated Automation (TIA) for yourself and learn how to get an integrated view of your plant! Because of this integration you will be able to diagnose faults quickly and correct them with safely.
  •  In addition, projects can be created in advance in such a way that you can work with multiple application. This enables time-optimized and cost-effective engineering..

Requirements

Basic knowledge of process control technology, open-loop and closed-loop control technology and of handling Windows applications.

 

Target group

  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Managing the project data in the SIMATIC Manager
  • Station and network configuration
  • Configuraton of AS functions in CFC
  • Configuration of monitoring and controlling in the OS
  • Configuration of monitoring and controlling in the OS
  • Configuration of sequences in SFC
  • Configuration of Server-Client Structure
  • Multiproject Engineering

Description/Objective

Combining hands-on tutorials with theory sessions, this course teaches participants the principles of field instrumentation, including pressure and temperature measurement and flow technologies. Working with the PI product portfolio, students gain an understanding of common applications, troubleshooting, customer requirements, and how to select a suitable product.

 

Requirements

Basic knowledge of process control technology, open-loop and closed-loop control technology and of handling Windows applications.

 

Target group

  • Maintenance personnel
  • Service personnel
  • Operators

Content

Pressure

  • Introduction to pressure principles and technology
  • Pressure terminology
  • Programming
  • Common applications
  • Maintenance and troubleshooting

Temperature

  • Theory
  • Transmitter design
  • Programming temperature diagnostics

Flow meter

  • Introduction to  flow meter principles
  • Flow meter technology
  • Programming and initialization
  • Applications
  • Maintenance and troubleshooting

Description/Objective

  • This course provides a basic knowledge for the SIMOTION system. The participant learns the configuration and startup of the system with axis,drives and visualization devices. The course also deals with programming of motion sequences with the help of Motion Control charts (MCC) and LAD/FBD.
  • Applications for positioning, gearing, measuring units and output cams are discussed and illustrated at exercises at training racks.

Requirements

  • Basic knowledge of automation
  • Basic knowledge of motion control,being familiar with SINAMICS S120.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Overview of SIMOTION system
  • A glance at the components of a SIMOTION system
  • Engineering system SCOUT
  • Hardware platforms of SIMOTION
  • Motion control technology packages
  • Creating a SIMOTION project
  • Starting up axis with D435
  • Programming of user programs with MCC and LAD/FBD
  • Configuring execution system
  • Using tools for error diagnosis and program test
  • Communication with the periphery and HMI
  • Practical exercises on training racks

Description/Objective

  • SINAMICS G120 allow the variable-speed operation of induction motors to drive pumps, fans, conveyor systems and many other machines. This course shows you how to handle the SINAMICS G120 inverter.
  • After the course you are able to correctly commission the inverter and adapt it to address the particular application. You will know suitable inverter functions and parameter settings for a wide range of applications. You can make a data backup, and taking the appropriate measures when faults occur.

Requirements

  • Basic knowledge of automation
  • General knowledge of AC drives, converter technology and control engineering.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Design and principle of operation of the SINAMICS G120 inverter with:
  • Control Unit CU
  • Power Module PM
  • Parameterization, data backup and diagnostics with:
  • BOP-2 and IOP operator panels
  • STARTER PC tool
  • Setpoint channel and closed-loop control
  • Control signals and signal interconnections
  • Inverter functions
  • Practical exercises using the training device with:
  • SINAMICS CU240E-2 PN with PM 240 FS A
  • §  SIMOTICS induction motor

Description/Objective

  • This training course encompasses the basics of the SINAMICS S120 drive system. It provides the technical knowledge for startup, parameterization, maintenance, drive optimization, and troubleshooting.
  • Also, in this course, basic knowledge of communication of PROFIBUS is included. Practical exercises for reinforcing the knowledge will be carried out on the SINAMICS S120 Training Case.
  • On completion of the course, participants will be able to implement automation solutions with the SINAMICS S120,and the STARTER PC tool allow the course participants to develop job-related skills at a practical level.

Requirements

  • Basic knowledge of automation
  • General knowledge of AC drives, converter technology and control engineering.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Brief overview of fundamentals of the drive system
  • Principles and overview of the SINAMICS S120
  • Motors and encoders for the SINAMICS S120
  • Design of the drive system and overview of documentation and service
  • Startup and parameterization with the STARTER commissioning tool
  • Diagnostics and troubleshooting
  • Using the memory card: Structure and data backup
  • Data backup using the STARTER commissioning tool
  • Fundamentals of communication via PROFIBUS
  • Software functions, closed-loop control and optimization of SERVO and VECTOR drives
  • Startup of the integral basic positioner (EPOS)
  • Hardware setup, wiring
  • Introduction of parameter structure and function diagrams
  • Practical exercises on the SINAMCS S120 training units

Description/Objective

In this course you learn the handling of drive based Safety Functions. You know applications of the different functions and you can parameterize them. Therefore you use the benefits in comparison with a conventional safety technology, like reduced cabling or faster commissioning of identical machines. In the course you will go through all steps for the implementation of the safety functions until the final acceptance report.

 

Requirements

  • A basic ability to use an MS Windows PC, keyboard and mouse to open and close programs, locate files, drag, drop, copy and paste objects/text.
  • Knowledge of SINAMICS S120 according to the course DR-SNS-SI.
  • For the topic PROFIsafe knowledge of SIMATIC S7 is useful.

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Fundamentals, standards and regulations of Machine Safety
  • Procedure of risk assessment
  • Performance Level (PL) and Safety Integrity Level (SIL)
  • Safety Evaluation Tool (SET) for the evaluation of PL and SIL
  • SINAMICS S120 Safety Integrated Basic Functions and Extended Functions
  • Control of the drive integrated Safety Functions via
  • Terminal Module TM54F and DRIVE-CLiQSIMATIC F-CPU and PROFIsafe
  • Effect of the settings of the closed-loop control and the kinetic energy of an axis on the safety functions
  • Execution of the acceptance test and preparation of the acceptance report
  • Procedures for the handling of spare parts and at retrofit measures
  • Practical exercises on training kits with SINAMICS S120, TM54F and SIMATIC F-CPU

Description/Objective

This course is aimed at personnel who wish to combine the theoretical aspects of CNC programming with a 'hands on' practical approach. The course covers ISO programming of the Sinumerik 810D, 840D and 840Di digital controls in Turning and Milling configurations.

On completion of the course the student will be able to:

  • Create NC programs with linear and circular motion
  • Create programs using R parameters and user variables
  • Create subprograms
  • Parameterise standard cycles
  • Testing of the NC programs using Simulation
  • Back up NC programs, Zero offsets and Tool offsets

Requirements

Some exposure to CNC machining techniques and terminology would be of benefit but is not essential.

 

Target group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  • Programming according to DIN 66025 + enhancements
  • Control Overview
  • Directory Structure
  • Workpiece creation
  • Co - ordinate systems
  • Frame Concept - Zero offsets
  • Tool offsets
  • Program Jumps - Labels
  • Subprograms
  • R parameters and system variables
  • Global User Data
  • Macros
  • Programming of cycles
  • Positional Control
  • Spindle Control
  • Polar co - ordinates
  • Program co - ordination
  • Auxiliary codes

Description/Objective

This course is aimed at personnel who wish to combine the theoretical aspects of electrical engineering and with a 'hands on' practical approach. The course covers all relevant IEC standards for control panel, SIMARIS Design software for electrical calculation, product selection and EPLAN Electric macro for panel design.

On completion of the course the student will be able to:

  • Understanding relevant aspects of IEC standards for control panel
  • Understanding deeply electrical parameters of electrical components and circuits
  • Create SIMARIS project for all types of control panel
  • Rated power and short circuit calculation
  • Optimization for electrical circuit of control panel
  • Temperature rise calculation
  • Product selection for control panel
  • Using online support tools for design
  • Convert SIRARIS design to EPLAN Electric
  • Using EPLAN macro for details panel design

Target group

Electrical and Automation design personnel

 

Requirements

Electrical basic knowledge

 

Content

Overview of control panel

  • Overview of important IEC standards for control panel building
  • Interface agreements and definitions in accordance with IEC 60204-1 and IEC 61439-1/-2
  • Required verifications in accordance with IEC 60204-1 and IEC 61439-1/2
  • Control cabinet practical engineering – short-circuit under control?
  • oControl panels in the EMC environment
  • Consideration of temperature rise in industrial control panels

IMARIS Design software

  • Software user interface
  • Essential electrical parameters of electrical panel in SIMARIS Design
  • Create a new project with specific single line diagram of control panel
  • Power sum calculation, short-circuit calculation, and products selection
  • Optimization control panel by SIMARIS design
  • Thermal calculation by SIMARIS Therm

Control product Online support tools

  • Control product configurators
  • CAx download manager
  • My Documents manager

EPLAN electric

  • Converting SIMARIS Design to EPLAN
  • Using EPLAN macro of Siemens control product for panel design

Enrollment with e-Pass

Siemens e-PASS is an online training portal from Siemens Industry Automation and Drive Technologies which provides information about courses of SITRAIN.

 

SITRAIN only accept training reservation by e-Pass, therefore it is mandatory for trainees to register e-Pass in advance. It would be valid once you make course registration before the training date. Registrations will be accepted on a first come, first serve basis.